Fluke-biomedical VT305 User Manual download pdf (Page 24)

VT305

Users Manual

Table 4. Electrical Interfaces

Item Description

The Micro-SD card is used for software updates and Product configurations. Measurement data can be output

through the micro SD card. See the Measurement Data section.

2 The O

interface is used to connect the O2 sensor to the Product.

The USB port is a data interface. It can also be used to operate with the mains power supply and to charge the

battery.

The Analog OUT port is used to output analog signals, connect to an external trigger, operate with the optional

mains power supply, and charge the battery of the Product. See the Specifications section for more data.

5 The RS-232 interface is used as a data interface. See the Specifications section for more data.

6 The CAN interface – future use.

7 The Ethernet interface is used to configure the Product and save the file to the SD card.

Operation

The sections that follow tell how to use the Product.

How to Turn On and Turn Off the Product

The Product is turned on and turned off when you push the

power button ().

The Start Screen

When the Product is turned on, the start-up screen in

Figure 7 shows in the display. After approximately

3 seconds the numerical measurement values show in the

display.

gyo076.eps

Figure 7. Start-Up Screen

Settings

Push X on the front panel to show the information screen.

This shows the device data. Push X again to show more

menu items to make adjustments. Push O to change

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 73 74

No comments

Fluke-biomedical VT305 User Manual Page 24