Fluke-biomedical VT305 User Manual download pdf (Page 38)

VT305

Users Manual

Product Configuration

You can configure the Product through the Ethernet

interface. When a configuration parameter is changed, the

change will be made in the Product and saved on the

micro SD card immediately.

Note

You must install Microsoft Silverlight 5 on Internet

Explorer 7+, Safari 4+, Chrome 12+, or

Firefox 3.6+ to configure the Product through the

internet.

1. Insert a micro SD card that contains the necessary

files into the Product. The SD card must contain the

ClientBin folder that includes ConfigurationWeb.asp

file, the clientaccesspolicy.xml file, and the index.html

file.

Note

The micro SD card must be installed in the

Product if you want to save the configuration. If

you cannot find the micro SD card, talk to your

Fluke Biomedical distributor or call Fluke

Biomedical technical support. See Technical

Support in the front of this manual.

2. Connect the Ethernet port of the Product to a network

or directly to a computer.

3. Push X on the Product to show the Ethernet screen.

4. Push O to select one of the three internet connection

methods: Default, Configured, and DHCP-Client.

The Default selection is the recommended method

when you connect the Product directly to a computer.

The Configured and DHCP-Client selection should

be used when you connect to an existing network.

See the How to Setup an Ethernet Connection section

for instructions to set an IP Address and subnet mask.

The browser-based configuration page in Figure 22

shows in the computer display when an Ethernet

connection is made.

5. To personalize the Product, type a name in the owner

field and a name in the company name field of the web

page.

6. In the upper-left corner of the web page, there are

main menu and submenu hyperlinks that you use to

navigate in the configuration tool.

7. To change Product configuration parameter values,

click on the configuration hyperlink. The configuration

page in Figure 23 shows in the computer display.

The submenu selections are VALUES, CURVES,

TRIGGERS, INTERFACE, and MISC. You click on these

submenu hyperlinks to open the configuration page that

will show the parameters for the selected parameter group.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 73 74

Comments to this Manuals

No comments

Fluke-biomedical VT305 User Manual Page 38

Comments to this Manuals

Related products and manuals for Equipment Fluke-biomedical VT305